Ethernet Slip Ring

Ethernet slip ring is designed explicitly for 250Mhz frequency signals. It is used to transmit 100M/1000M Ethernet signals. It can mix electrical power channels and signal channels and can transmit multi-channel low-frequency signals and currents.

1. Provide RJ45 connector for direct plug;

2. Up to 8 Ethernet channels can be transmitted simultaneously;

3. Enable to transmit Ethernet (10M/100M/1000M BaseT);

4. Standard network connection mode;

5. Work with the current channel or gas-liquid rotary joint;

power slip ring with ethernet

Introduction

Ethernet slip ring, also known as network cable slip ring, is a technology designed to implement local area network communication. It specifies the content of physical layer connections, electronic signals, and media access layer protocols. Ethernet is currently the most commonly used local area network technology, and it occupies a critical piece in information transmission.

The Ethernet slip ring is designed for a 250MHz frequency signal, used to transmit 100M/1000M Ethernet signal, stable transmission, no packet loss, no serial code, low return loss, low insertion loss, strong anti-interference ability, support POE, etc. advantage. It can mix electrical power channels and signal channels and transmit multi-channel low-frequency signals and currents simultaneously. It has the advantages of stable transmission, no packet loss, no serial code, slight return loss, and small insertion loss.

The working principle of the ethernet slip ring is similar to the guide of an ordinary conductive slip ring. Both are composed of stators and rotors. The design structure of the stator and rotor is a precise superposition of a single channel. The stator channel corresponds to the rotor channel and forms a channel between the rotor and the stator. The electrical performance of each channel is independent of the other and cannot interfere.

Based on the original electric slip ring, it can transmit Ethernet signals. It can also mix electrical power channels and signal channels and transmit multi-channel low-frequency signals and currents simultaneously.

Wanna dig deeper into the custom slip rings?

There are more details described in this catalog, you can leave us your email here and our experienced engineer will contact you within 24 hours.

pdf icon